All new steel, Scratchbuilt Narrowed Linkpin OR Balljoint Type II airride beams.
Built here, in my shop, on my table, by me!
*These are built to order, I have nothing in stock and ready to go. Please email me for current turnaround times. These take me awhile... *
Available 3,4 & 5" Narrowed.
Brand new steel tubing, cnc'd cut parts, top notch materials, all jig built!
Includes:
- All new DOM steel beam
drilled and tapped for grease fittings
- New laser cut sideplates with dual bolt pattern
( bolts into your split OR baywindow )
- New beam bushings
- New laser cut airbag brackets and mounts
- Grade 8 hardware throughout
- 1/2" thick pivot arms, to make it all work
- Chromoly through rods to replace the lower torsion springs
- Two new slam specialties bags.
*Be sure to add tie rods and ends before you check out if you want em!
** 71+ Bus, this beam will mean eliminating your brake booster. **
Front heat tube will have to be modified for proper install of either type. You may have to get creative.
To get the maximum drop from this beam, wheel tubs and tie rod notches will also be required. Beam can be used without either, but you won't get the full drop.
I typically don't condone cutting busses, but if you're interested in airride, that's what it will take to get completely on the ground.
Flipped/ Dropped spindles are a must but I also suggest looking into the 5" Drops, for less frame modification.
You will need fittings and air management to make it all work. These are available from several places.
Not currently offering any airride parts for the rear half. I only do those here in house!
